The path chip says “Select a path”

Nothing Conga can use was selected. Select the path itself in the timeline (a mask’s Mask Path, or a shape’s Path), its mask, or its path group, then click the chip. Selecting a whole layer works only when that layer has exactly one path.

Line up says “Pick a path”

No path is picked, or the one picked has been deleted. Pick a path with the path chip first.

Line up says “Select layers”

No layers that can join a line are selected. The path’s own layer and Conga nulls never join, so select the layers you want to move as well.

Line up says a number of “locked”

Every selected layer is locked. Unlock them and click Line up again. When only some are locked, the rest line up and the message counts the ones skipped.

Nothing changes and the message says “The Conga null is locked”

Adding layers, changing a control or reordering all write to the Conga null. Unlock it in the timeline.

A reorder says “A layer in the line is locked”

The layers that would swap places include a locked one. Unlock it, or drag a different dot.

“That Conga is gone” or “The line changed; try again”

The line was deleted, released or changed outside the panel since it was last read. Move the pointer over the panel to read the comp again, then try once more.

Release says “No Conga”

The selected layers aren’t in a Conga line. Select the Conga null or a layer in the line, or deselect everything to release every line in the comp.

The layers face the wrong way

Conga turns art that faces right to the way the path runs. For art drawn facing another way, set Rotation Offset in the Conga effect, such as 90 for art drawn facing up. To keep the layers’ own angle, turn Orient off.

The layers bunch up at the end of the path

With Loop off, a layer past an end waits there. Lower Progress, close up Spacing, or turn Loop on so they come round from the start.

The layers float off a 3D path

A 2D layer on a 3D path rides the path where the camera shows it, keeping its own depth. Make the layers 3D so they ride the path in 3D space.

“No active composition”

Conga works on the comp you have open. Open the comp in the viewer or timeline and try again.