Controls
| Control | Click | Shift | Alt |
|---|---|---|---|
| Convert | Selected masks become a new shape layer. With only shape paths selected, they become masks on the target. | Moves instead: the original masks or paths are removed. | |
| Copy | Puts the selected masks, or shape paths, on the target layer. | Moves instead: the original masks or paths are removed. | |
| Split | Puts each mask of the selected layers on its own copy of the layer. | ||
| Target | Makes the selected layer the target. | Clears the target. | |
| The card | Same as Convert. | Same as Shift-click Convert. |
What a selection means
- A layer brings all of its masks, and on a shape layer, all of its paths.
- Masks, or the layer’s Masks group, bring only those masks.
- Shape paths or groups bring those paths. A group brings every path inside it. Rectangles, ellipses, stars and polygons count as paths.
- Masks and paths together: Convert and Copy work on the masks.
- The target is left out whenever other layers are selected too, so you can keep it selected.
Split ignores which masks are selected and uses every mask on each selected layer.
The target
The target is where Copy, and Convert from shapes to masks, put their results.
Click the chip with a layer selected to target it. With several layers selected, it takes the one you selected last. With only a mask or a property selected, it takes that property’s layer. The chip shows the target’s name, and stays set until you pick another layer or Alt-click the chip to clear it.
A target belongs to its comp. In another comp the chip reads Target again, and Copy asks you to pick one. Go back to the first comp and the target is still set.
Shift moves
Hold Shift over Convert or Copy. The caption adds · moves and the hint line reads Moving: the originals are removed.
Click and the new masks or paths land first, then the originals are removed. To move from a locked layer, unlock it first.
What the panel shows
- The card shows a mask outline on one side and a filled shape on the other. It turns to match what’s selected when the pointer comes into the panel, leans when you hover Convert, and flips when Convert lands. It’s dashed when nothing usable is selected.
- The hint line, Shift moves instead of copying, sits at the bottom when the slot has room for it.
- The caption under the card says what’s selected, such as 5 masks selected or 1 shape path selected. Over a button it says what that button would do:
| Over | Caption |
|---|---|
| Convert, masks | 5 masks → shapes |
| Convert, paths | 1 path → masks on Halo, or 1 path → masks · pick a target |
| Copy | 1 mask → Hatch, or Pick a target layer |
| Split | 6 masks → 6 layers, or Select a layer with two or more masks |
| Target | Target: Hatch, or Select a layer, then pick it as the target |
With Shift held, Convert and Copy add · moves.
After a click
| Where | Shows | Meaning |
|---|---|---|
| Convert tile | 5 paths, or 1 mask | That many shape paths or masks were made |
| Copy tile | 1 mask, or 3 paths | That many landed on the target |
| Split tile | 6 layers | That many layers were made |
| Message | Converted 5 masks into shapes | Moved when Shift was held, plus the keys written, such as · 106 keys |
| Message | Converted 1 path into masks on Halo | Shape paths went to the target as masks |
| Message | Copied 1 mask to Hatch | Moved when Shift was held |
| Message | Split into 6 layers · original hidden | Adds how many locked layers were skipped |
In narrow tiles the count shortens to a number.
Each click is one step in Edit → Undo: Masquerade: Convert, Masquerade: Copy or Masquerade: Split. Picking a target isn’t an undo step.
When a click does nothing
The tile shakes, a short badge says why, and a message gives the reason.
Here no target is picked, so Copy shows Pick a target and the Target chip shakes as well.
| Badge | Message | Cause |
|---|---|---|
| No selection | Select masks or shape paths to convert (or to copy) | Nothing is selected |
| Nothing here | Select masks or shape paths to convert (or to copy) | The selected layers have no masks or shape paths |
| Pick a target | Pick a target layer | Copy, or Convert from shapes, with no target in this comp |
| Locked | The target layer is locked | The target is locked |
| Locked | Unlock Peak to move its paths | Shift-click with a locked source layer |
| No masks | The target can’t hold masks | The target can’t take masks |
| Not a shape | Paths copy onto a shape layer · Convert makes masks | Copy with shape paths and a target that isn’t a shape layer |
| No selection | Select a layer with masks to split | Split with nothing selected |
| One mask | Split needs a layer with two or more masks | No selected layer has two masks |
| Locked | The layer is locked | Every layer Split could use is locked |
| No selection | Select a layer to target | Target chip with nothing selected |
| No masks | Cameras and lights can’t hold masks | Target chip with a camera or light selected |
| No comp | No active composition | No comp is open |
| Not done | After Effects couldn’t say where the layers sit | After Effects couldn’t report a layer’s position; nothing changed |
In very narrow tiles the badges are left out and only the message shows.
Slot sizes
Masquerade’s default slot is 10 columns by 9 rows. Its smallest slots are 2 columns by 5 rows, 4 columns by 3 rows, or 6 columns by 2 rows.
With room, the card sits on top, the three tiles below it in a row (or a column when the slot is tall and narrow), and the Target chip under them. In smaller slots the card and the hint line drop out.
In a narrow strip or a short slot, Convert, Copy, Split and Target become four cells, stacked or side by side. The Target cell shows the target's name. Tooltips are left out at the smallest sizes.
In a short row the four cells sit side by side. Hovering a tile shows a small count, such as 5 → shapes, since there's no caption.